DPV-3ERN

$96.00

Description

3 1/2 digit LCD, Red Negative, 24 Vdc B/L power

The DPV-3 voltage-powered and controlled indicator features a large 1/2", 3-1/2 digit red, blue, amber, or green backlit LCD display. Also available in standard black on green. Powered by 12 or 24Vdc, it is compatible with virtually any 200mVdc, 5Vdc, or 10Vdc signal. User selectable "°F", "°C", "PSI", and "%" engineering units can be displayed. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.

Features

  • Low-cost, high-performance replacement for many OEM DPMs
  • Optional Red, Blue, Green or Amber backlighting
  • Snap-in bezel mount eliminates mounting hardware
  • Resistant to RF and EMI
  • 3 1/2 digits with high-contrast LCD Display
  • 12V or 24V DC Voltage powered
  • User selectable, displayed engineering units

Dimensions

Width 2.54" (64.6 mm)
Height 1.14" (29.0 mm)
Depth 1.87" (47.5 mm)
Cutout
Width 2.4" (61.0 mm)
Height 1.0" (25.4 mm)

Specifications

ConfigurationSingle-ended
Digits3u00bd digits (u00b119999 counts)
Gain Range1-2000 counts above adjusted zero
ColorRed Negative
AdjustmentsSpan (gain)(2) (10V and 5V) and Zero (offset)
Accuracyu00b1(0.1% fs + 2 counts)
Connection4 screw terminal (6 with backlight)
MountingSnap-in bezel mount
Offset Range-1999 to +1999
OverloadThree lower order digits blank for inputs >1999 & <-1999
Ranges0-10V DC, 0-5V DC or 0-200mV DC
Conversion Rate3 per Second
Type0.45" (11.4 mm) 7-Segment LCD
Annunciatorsu00b0F, u00b0C, PSI, %, user selectable
Power Supply12V DC or 24V DC regulated (selectable)
Impedance390 K? min.
Temperature Coeffu00b1100 ppm per u00baC Typical
PolarityAutomatic, "-" Displayed.
Operating Range0 to 50 u00baC
Decimal Points3 Position, User Selectable
Order Info3u00bd digit LCD, Neg. Red, 24 Vdc B/L power
Warmup10 Minutes Typical
Optional Backlight24V DC at 35 mA typical
Normal Mode Rejection>30 db @ 60 Hz
Storage Range-10 to 60u00baC