Out of stock


3 1/2 digit LCD, NO Backlight

The DPV-3 voltage-powered and controlled indicator features a large 1/2", 3-1/2 digit red, blue, amber, or green backlit LCD display. Also available in standard black on green. Powered by 12 or 24Vdc, it is compatible with virtually any 200mVdc, 5Vdc, or 10Vdc signal. User selectable "°F", "°C", "PSI", and "%" engineering units can be displayed. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.


  • Low-cost, high-performance OEM DPMs
  • Red, Blue, Green or Amber backlight
  • Snap-in bezel mount eliminates mounting hardware
  • Resistant to RF and EMI
  • 3 1/2 digits with high-contrast LCD Display
  • 12V or 24V DC Voltage powered
  • User selectable, displayed engineering units


Width 2.54" (64.6 mm)
Height 1.14" (29.0 mm)
Depth 1.87" (47.5 mm)
Width 2.4" (61.0 mm)
Height 1.0" (25.4 mm)


Storage Range-10 to 60C
Warmup10 Minutes Typical
Conversion Rate3 per Second
Operating Range0 to 50C
Ranges0-10V DC, 0-5V DC or 0-200mV DC
Optional Backlight24V DC at 35 mA typical
Gain Range1-2000 counts above adjusted zero
OverloadThree lower order digits blank for inputs >1999 & <-1999
Order Info3 digit LCD, NO backlight
AdjustmentsSpan (gain)(2) (10V and 5V) and Zero (offset)
Offset Range-1999 to +1999
Decimal Points3 Position, User Selectable
Connection4 screw terminal (6 with backlight)
Digits3 digits (1999 counts)
PolarityAutomatic, "-" Displayed.
Impedance390 K min.
Accuracy1(0.1% fs + 2 counts)
Normal Mode Rejection>30 db @ 60 Hz
Power Supply12V DC or 24V DC regulated (selectable)
AnnunciatorsF, C, PSI, %, user selectable
Type0.45" (11.4 mm) 7-Segment LCD
MountingSnap-in bezel mount