$119.00
4 to 20mA loop powered LCD, Red Negative
The DPL-8 provides a loop powered 0.98", 3 1/2 digit LCD (standard black numerals) with optional 24Vdc powered red, blue, amber, or green negative backlight. It is compatible with virtually any 4 to 20mA dc process loop. User selectable °F, °C, PSI, and % engineering units can be displayed. Fully loop compatible. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.
| Hold | Display Hold Function is Standard |
| Impedance | >1M?, (>10M? on 200mV range) |
| Color | Red |
| Protection | u00b1350V DC, (u00b1100V DC on 200mV range) (u00b130 mA on 4-20mA) |
| Accuracy | u00b1(0.05% fs +1 count) |
| Type | 0.98" (24.9mm) |
| Polarity | Automatic, "-" Displayed. |
| Common Mode Rejection | >86dB |
| Power Supply | Powered by the Milliamp Control Loop. Loop Burden 300 W nominal |
| Common Mode Range | u00b11V DC |
| Connection | 4 screw terminal (4-20mA) 13 pin male connection (voltage) 13 pin connector/wiring harness included |
| Overload | Three lower order digits blank for inputs >1999 & <-1999 |
| Warmup | 10 Minutes Typical |
| Normal Mode Rejection | >30 db @ 60 Hz |
| Decimal Points | 3 Position, User Selectable |
| Conversion Rate | 3 per Second |
| Mounting | Snap-in Panel Mount |
| Annunciators | PSI, u00b0F, u00b0C, % (user selected) |
| Temperature Coeff | u00b1100 ppm per u00baC Typical |
| Storage Range | -40 to 75u00baC |
| Configuration | Bipolar Differential |
| Digits | 3u00bd Digits (u00b11999 counts) |
| Zero Adjustment | Automatic |
| Operating Range | -10 to 50 u00baC |
| Ranges | u00b1200.0mV, u00b12.000V, u00b120.00V DC, 4-20mA |
