4 1/2 digit LCD, Green Negative, 24 Vdc B/L power

The DPV-4 voltage-powered and controlled indicator features a large 1/2", 4 1/2 digit red, blue, amber, or green backlit LCD display. Also available in standard black on green. Powered by 12 or 24Vdc, it is compatible with virtually any 200mVdc, 5Vdc, or 10Vdc signal. User selectable "°F", "°C", "PSI", and "%" engineering units can be displayed. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.


  • Low-cost, high-performance replacement for many OEM DPMs
  • Optional Red, Blue, Green or Amber backlighting
  • Snap-in bezel mount eliminates mounting hardware
  • Resistant to RF and EMI
  • 4 1/2 digits with high-contrast LCD Display
  • 12V or 24V DC Voltage powered
  • User selectable, displayed engineering units


Width 2.54" (64.6 mm)
Height 1.14" (29.0 mm)
Depth 1.87" (47.5 mm)
Width 2.4" (61.0 mm)
Height 1.0" (25.4 mm)


Power Supply12V DC or 24V DC regulated (selectable)
Connection4 screw terminal (6 with backlight)
Ranges0-10V DC, 0-5V DC or 0-200mV DC
Type0.45" (11.4 mm) 7-Segment LCD
Optional Backlight24V DC at 35 mA typical
Annunciatorsu00b0F, u00b0C, PSI, %, user selectable
Conversion Rate3 per Second
Temperature Coeffu00b1100 ppm per u00baC Typical
PolarityAutomatic, "-" Displayed.
OverloadFour lower order digits blank for inputs >19999
Order Info4u00bd digit LCD, NO backlight
Storage Range-10 to 60u00baC
Accuracyu00b1(0.1% fs + 2 counts)
Normal Mode Rejection>30 db @ 60 Hz
Decimal Points3 Position, User Selectable
Offset Range-19999 to +19999
AdjustmentsSpan (gain)(2) (10V and 5V) and Zero (offset)
MountingSnap-in bezel mount
Digits4u00bd Digits (u00b119999 counts)
Gain Range1-20000 counts above adjusted zero
Operating Range0 to 50 u00baC
Warmup10 Minutes Typical
Impedance390 K? min.
ColorGreen Negative