4 1/2 digit LCD, Red Negative, 24 Vdc B/L power

The DPV-4 voltage-powered and controlled indicator features a large 1/2", 4 1/2 digit red, blue, amber, or green backlit LCD display. Also available in standard black on green. Powered by 12 or 24Vdc, it is compatible with virtually any 200mVdc, 5Vdc, or 10Vdc signal. User selectable "°F", "°C", "PSI", and "%" engineering units can be displayed. Separate zero and span adjustments. Decimal point user selectable. Factory calibration available.


  • Low-cost, high-performance replacement for many OEM DPMs
  • Optional Red, Blue, Green or Amber backlighting
  • Snap-in bezel mount eliminates mounting hardware
  • Resistant to RF and EMI
  • 4 1/2 digits with high-contrast LCD Display
  • 12V or 24V DC Voltage powered
  • User selectable, displayed engineering units


Width 2.54" (64.6 mm)
Height 1.14" (29.0 mm)
Depth 1.87" (47.5 mm)
Width 2.4" (61.0 mm)
Height 1.0" (25.4 mm)


Optional Backlight24V DC at 35 mA typical
Temperature Coeffu00b1100 ppm per u00baC Typical
Digits4u00bd Digits (u00b119999 counts)
Accuracyu00b1(0.1% fs + 2 counts)
Offset Range-19999 to +19999
Order Info4u00bd digit LCD, NO backlight
Connection4 screw terminal (6 with backlight)
Gain Range1-20000 counts above adjusted zero
MountingSnap-in bezel mount
Type0.45" (11.4 mm) 7-Segment LCD
Operating Range0 to 50 u00baC
PolarityAutomatic, "-" Displayed.
Decimal Points3 Position, User Selectable
ColorRed Negative
Normal Mode Rejection>30 db @ 60 Hz
OverloadFour lower order digits blank for inputs >19999
Annunciatorsu00b0F, u00b0C, PSI, %, user selectable
Ranges0-10V DC, 0-5V DC or 0-200mV DC
Warmup10 Minutes Typical
Storage Range-10 to 60u00baC
Conversion Rate3 per Second
Power Supply12V DC or 24V DC regulated (selectable)
Impedance390 K? min.
AdjustmentsSpan (gain)(2) (10V and 5V) and Zero (offset)